Load data for .38 Special + .355 | 75gr | Lehigh Defense Controlled Fracturing

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| Lehigh Defense Controlled Fracturing
Manufacturer SKU:	C Fractur 02355075SP
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.510" \| 13.0mm
Caliber:	.38 Special load data
Case Length (l3):	1.145" \| 29.1mm
Cartridge Length (C.O.L.):	1.328" \| 33.7mm
Seated Depth:	0.327" \| 8.3mm
Shank Seated Depth:	0.327" \| 8.3mm
Case Capacity:	23.1 Grains of Water \| 1.50 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	21756 psi \| 1500 bar
LID:	LID_B11035_C585
Last updated:	2025-11-04

Load data for 72 loads in caliber .38 Special with .355 | 75gr | Lehigh Defense Controlled Fracturing bullet and 36 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	65%	19377	89%	**86	98%
ADI APS 450	<<locked>>	62%	18840	87%	**12	100%
ADI AS 30	<<locked>>	69%	19566	90%	**04	100%
ADI AS 50N	<<locked>>	67%	19406	89%	**40	100%
[Accurate No. 2]*	<<locked>>	69%	18652	86%	**27	88%
Accurate Solo 1000	<<locked>>	67%	19029	87%	**04	100%
Accurate Solo 1250	<<locked>>	77%	19406	89%	**70	98%
Alliant BULLSEYE	<<locked>>	66%	19290	89%	**90	93%
Alliant UNIQUE	<<locked>>	78%	19174	88%	**06	92%
Baschieri & Pellagri 100	<<locked>>	71%	19174	88%	**24	100%
Hodgdon Universal	<<locked>>	72%	19377	89%	**86	98%
Hodgdon CFE Pistol	<<locked>>	73%	19014	87%	**67	97%
Hodgdon TrailBoss	<<locked>>	96%	8079	37%	**30	96%
Lovex S020	<<locked>>	71%	18811	86%	**80	95%
Maxam CSB 1	<<locked>>	79%	19189	88%	**63	98%
Maxam CSB 2	<<locked>>	79%	18507	85%	**96	100%
Maxam CSB 3	<<locked>>	72%	18579	85%	**34	100%
Maxam CSB 4	<<locked>>	69%	19087	88%	**34	100%
Maxam CSB 5	<<locked>>	64%	18855	87%	**78	100%
Ramshot Silhouette	<<locked>>	64%	19479	90%	**93	90%
ReloadSwiss RS 12	<<locked>>	69%	18811	86%	**96	100%
[ReloadSwiss RS 14]*	<<locked>>	95%	6570	30%	**1	88%
ReloadSwiss RS 20	<<locked>>	82%	19508	90%	**35	95%
Rottweil P 801	<<locked>>	62%	18753	86%	**57	100%
SNPE Vectan A0	<<locked>>	79%	19551	90%	**53	92%
SNPE Vectan BA 9	<<locked>>	69%	19058	88%	**37	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	86%	19305	89%	**70	83%
SNPE Vectan BA9 1/2	<<locked>>	71%	18724	86%	**53	97%
Somchem MP200	<<locked>>	72%	19508	90%	**96	91%
Somchem MS200	<<locked>>	74%	18985	87%	**63	93%
[Vihtavuori 3N37]*	<<locked>>	81%	19305	89%	**19	85%
Vihtavuori N320	<<locked>>	71%	19508	90%	**63	100%
Vihtavuori N32C Tin Star	<<locked>>	97%	19508	90%	**94	100%
Vihtavuori N330	<<locked>>	74%	18884	87%	**06	99%
Vihtavuori N340	<<locked>>	76%	18811	86%	**73	92%
[Vihtavuori N350]*	<<locked>>	85%	19421	89%	**16	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	17405	80%	**37	97%
ADI APS 450	<<locked>>	60%	17695	81%	**83	100%
ADI AS 30	<<locked>>	61%	15374	71%	**86	100%
ADI AS 50N	<<locked>>	62%	16433	76%	**52	100%
[Accurate No. 2]*	<<locked>>	61%	13982	64%	**66	83%
Accurate Solo 1000	<<locked>>	61%	15925	73%	**09	100%
Accurate Solo 1250	<<locked>>	62%	12299	57%	**30	91%
Alliant BULLSEYE	<<locked>>	61%	16563	76%	**04	91%
[Alliant UNIQUE]*	<<locked>>	61%	11400	52%	**20	82%
Baschieri & Pellagri 100	<<locked>>	62%	14388	66%	**83	98%
Hodgdon Universal	<<locked>>	61%	14025	64%	**22	95%
Hodgdon CFE Pistol	<<locked>>	61%	13300	61%	**86	93%
[Hodgdon TrailBoss]*	<<locked>>	60%	3568	16%	**2	80%
[Lovex S020]*	<<locked>>	61%	13503	62%	**06	89%
Maxam CSB 1	<<locked>>	61%	11052	51%	**78	90%
Maxam CSB 2	<<locked>>	61%	10153	47%	**04	94%
Maxam CSB 3	<<locked>>	60%	13111	60%	**60	97%
Maxam CSB 4	<<locked>>	61%	15113	69%	**19	100%
Maxam CSB 5	<<locked>>	62%	17724	81%	**48	100%
[Ramshot Silhouette]*	<<locked>>	61%	16984	78%	**14	87%
ReloadSwiss RS 12	<<locked>>	60%	13996	64%	**55	100%
[ReloadSwiss RS 14]*	<<locked>>	78%	4743	22%	**3	80%
[ReloadSwiss RS 20]*	<<locked>>	62%	10530	48%	**01	83%
Rottweil P 801	<<locked>>	61%	17695	81%	**24	100%
[SNPE Vectan A0]*	<<locked>>	61%	11777	54%	**88	83%
SNPE Vectan BA 9	<<locked>>	61%	14852	68%	**02	92%
[SNPE Vectan BA7 1/2]*	<<locked>>	81%	17042	78%	**91	80%
SNPE Vectan BA9 1/2	<<locked>>	61%	13460	62%	**83	93%
[Somchem MP200]*	<<locked>>	61%	13808	63%	**06	85%
[Somchem MS200]*	<<locked>>	62%	13271	61%	**66	87%
[Vihtavuori 3N37]*	<<locked>>	75%	16099	74%	**11	81%
Vihtavuori N320	<<locked>>	61%	14228	65%	**19	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	7281	33%	**04	98%
Vihtavuori N330	<<locked>>	62%	12531	58%	**93	94%
[Vihtavuori N340]*	<<locked>>	61%	11589	53%	**11	83%
[Vihtavuori N350]*	<<locked>>	78%	16041	74%	**01	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data